4*T6 LED Bicycle Lights Waterproof 8800LM Bike Front Light Rechargeable Flashlight For Bicycle Lantern Headlight Cycling Torch Tips:This product has 2 stylesStyle1: only front light + apron + switch lineStyle2: headlights + apron + switch line + battery pack (No Battery Included!)Please check carefully to avoid unnecessary disputes! Please understand, thank you The package includes:[Headlight only]1×LED bicycle headlights2× fixed rubber ring1xUSB charging cable switch line[Set]1X LED bicycle headlights2X Fixed rubber ring (large × 1, small × 1)1X USB charging cable switch line1X Battery pack (Excluding 4*18650 battery, battery not included) Note that the battery is not included. Please purchase it separately! We have no channels to send you. Thank you for your choice! Description:Lamp Beads: CREE XML - T6 LEDNumber of beads: 4PcsMaximum output: 8800 lumensWaterproof rating: IPX-4 (cannot be placed in water)Material: aluminum alloyAngle of view: 130°Switch mode: 3 modes (high > low > strobe)Running time: highlights last about 3 hours, low light lasts about 5 hoursLED life: about 50,000 hoursSize: as shown Instructions for use:1. Check the battery: Make sure the battery is charged and installed in the correct direction as the flashlight;2. When the flashlight is in use, it should be selected according to the voltage and battery requirements of the flashlight. It should not be used indiscriminately to prevent the circuit board from being burnt out. Different types of batteries with different voltages should not be used at the same time;3. In use, when the brightness of the flashlight changes significantly, turn off the flashlight to prevent the battery from being over-discharged and timely charged; pay attention to the battery's waterproof, moisture-proof, anti-drop, etc., according to the charging speed of the charger when charging, After the indicator light changes, remove it in time, do not overshoot;4. For batteries that are not used for a long time, the battery should be filled and kept, and then charged and discharged once every three months to avoid chemical corrosion;5. The inner wall of the lamp cup is kept clean. Never wipe it with your hand or a hard object. Clear the fingerprint on the lens and wipe it gently with a cotton swab and lens cleaner.6. Do not touch the flashlight with sunlight, water, chemicals and corrosive gases for a long time to avoid damage to the flashlight;7. Non-professionals should not disassemble the flashlight to prevent damage to the circuit board. Note:1. Do not illuminate the eyes directly to avoid injury to the eyes;2. Do not use over voltage, the voltage should not exceed 4.2V, please do not reverse the battery, otherwise it will burn the circuit board;3. Please look for the positive and negative poles of the charger when charging, do not overcharge and discharge the battery, so as not to damage the battery life (charge time is generally 5-8 hours)4. When using the flashlight, check that the threads are not tightened, otherwise it may cause the light to be bright;5. The flashlight should be kept away from sunlight or high temperature. After using it, please take out the battery and store it in a cool and dry place.6. The company's flashlight has the ability to waterproof the life. Generally, the rain will not cause problems, but it does not have the diving function. Do not carry this flashlight to dive or put it in the basin or bathtub for a long time;7. To keep the O-ring (sealing rubber ring) and the thread from rotating smoothly, wipe the Vaseline oil on the surface 2-3 times a year. Battery Not Included!!! Battery Not Included!!! Battery Not Included!!! Battery Not Included!!!
No comments:
Post a Comment